The Series 441 programmable temperature transmitter is a 2-wire transmitter with an analog output. It has measurement input for resistance thermometers (RTD) in 2-, 3- or 4-wire connections, thermocouples, resistance and voltage inputs.
Setting up of the transmitter is done using the communication cable.
These small units can be mounted in Pyromation DIN (Form B) connection heads or they can be used for surface mounting by using a 35 mm DIN-rail mounting clip.
Features
Universally PC programmable for various signals
Galvanic isolation
2-wire technology, (4 to 20) mA analog output
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit
RFI/EMI Protected, CE marked
UL Recognized Component
FM General-Purpose and non-incendive for use in Intrinsically-Safe and non-incendive for Hazardous Areas
Online configuration during measurement using SETUP connector
The Series 441 programmable temperature transmitter is a 2-wire transmitter with an analog output. It has measurement input for resistance thermometers (RTD) in 2-, 3- or 4-wire connections, thermocouples, resistance and voltage inputs.
Setting up of the transmitter is done using the communication cable.
These small units can be mounted in Pyromation DIN (Form B) connection heads or they can be used for surface mounting by using a 35 mm DIN-rail mounting clip.
Features
Universally PC programmable for various signals
Galvanic isolation
2-wire technology, (4 to 20) mA analog output
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit
RFI/EMI Protected, CE marked
UL Recognized Component
FM General-Purpose and non-incendive for use in Intrinsically-Safe and non-incendive for Hazardous Areas
Online configuration during measurement using SETUP connector