Images are representations only.

RTD Assemblies with Extension Leadwire

Brand: Pyromation
The RTD elements are designed to measure temperature in a variety of process and laboratory applications.

These RTDs are specifically designed for use in two different process temperature ranges and will provide accurate and repeatable temperature measurement through a broad range.
 
Low range RTDs are constructed using fluoropolymer-insulated, silver-plated copper internal leads with potting compounds to resist moisture penetration.

High range RTDs are constructed with nickel internal leads inside swaged MgO insulated cable to allow higher temperature measurements at the RTD element and provide higher temperature lead protection along the sheath.
The RTD elements are designed to measure temperature in a variety of process and laboratory applications.

These RTDs are specifically designed for use in two different process temperature ranges and will provide accurate and repeatable temperature measurement through a broad range.
 
Low range RTDs are constructed using fluoropolymer-insulated, silver-plated copper internal leads with potting compounds to resist moisture penetration.

High range RTDs are constructed with nickel internal leads inside swaged MgO insulated cable to allow higher temperature measurements at the RTD element and provide higher temperature lead protection along the sheath.

Specifications

Element Material

  • Platinum

Insulation Material

  • Fluoropolymer
  • MgO

Temperature Range

  • -200° to 600° C

Sheath Material

  • 316 Stainless Steel

Sheath Diameter

  • 1/8”, 3/16”, 1/4”, 3/8”

Element Connection

  • 2-Wire
  • 3-Wire
  • 4-Wire

Tip O.D.

  • 1/4” , 3/16”, 1/8”

Tip Length

  • 1-1/4”