Images are representations only.
Description
Features
- Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
- Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
- The 1/4" NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
- 100% helium leak tested to 1x10-4 ml/s for guaranteed performance and reliability
- Blow-out proof stem provides a secondary stem seal in the full open position
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust cap for bonnet and stem (non-packing)
Options
- Panel Mountings
- O-Ring Materials
- Handles
- Packings
- Regulating Stem
- Stem Tips
Configure
Specifications
Specifications
Brand
Enclosure Finish
- Vinyl Dust Cap for Bonnet & Stem (Non-Packing)
Enclosure, Body Material
- Electro-Polished 316 Stainless Steel
- Zinc-Nickel-Plated Steel
Flow Capacity
- 0.44 Cv
Handle Assembly Material
- 1-3/8”, 1-3/4” Phenolic
Mounting
- Panel Mount
NPT Inlet
- 1/2” NPT Female
- 1/2” NPT Male
- 1/4” NPT Female
- 1/4” NPT Male
NPT Outlet
- 1/2” NPT Female
- 1/2” NPT Male
- 1/4” NPT Female
- 1/4” NPT Male
O-Ring Material
- Ethylene Propylene (EPR)
- FFKM (Kalrez 3018 or Equivalent)
- FKM
- NBR
Options
- Handle
- Regulating Stem & Stem Tips
Orifice Size
- 0.187”
Packing Material
- Grafoil
- PTFE
Pressure Rating
- psi: 10,000 (kPa: 68,948, bar: 689.5) at 93° C (200° F)
Seat / Seal Material
- 304L Stainless Steel
- Steel
Stem Length
- 4” Standard
- 5-3/8” Extended Length Available
Stem Material
- 316 Stainless Steel
- 440C Stainless Steel
- Carbide
- Ceramic
- Monel
Stem Type
- Non-Rotating
- Regulating Hard
- Standard Ball Stem
Valves
- Three
