Images are representations only.

Melt-Bolt RTD

Brand: Pyromation
Request Information
The melt-bolt RTD sensor illustrated below is used on extruders and injection molding machines to directly measure the melt temperature of plastic as it moves down the extruder barrel. 

This sensor is made of 300 series stainless steel and is constructed using a 100 Ω platinum element with a temperature coefficient of 0.003 85 ºC-1 (IEC Class B).
The melt-bolt RTD sensor illustrated below is used on extruders and injection molding machines to directly measure the melt temperature of plastic as it moves down the extruder barrel. 

This sensor is made of 300 series stainless steel and is constructed using a 100 Ω platinum element with a temperature coefficient of 0.003 85 ºC-1 (IEC Class B).
Close
Close

Specifications

Brand

Element Connection

  • 2-Wire
  • 3-Wire

Tip O.D.

  • 1/8”, 3/16”

Bolt Length

  • 3” to 6”

Tip Length

  • 1/8”, 1/4”, 1/2”, 3/4”, 1”

Insulation

  • Fiberglass
  • Polyimide
Close

Documentation

Data Sheets

Close