Description
The DST Series Ultrasonic Sensors are designed to be used in conjunction with the DCR controllers to give you a simplified, stand-alone system. The transmit and receive circuit is built into the sensor and digitally communicates the detected distance to the DCR controller. This allows the sensor to be separated from the DCR controller by up to 2000 feet with no signal loss.
With several sensors to choose from, there are plenty of options for your application needs. for use with DCR Controllers.
Features- AutoSense software provides hassle-free setup
- Internal temperature compensation
- Controller and sensor can be separated up to 2,000 ft (650 m)
Configure
Specifications
Specifications
Accuracy
- ± 0.25 % of Detected Range
Cable Length
- Standard Cable Length: 10 feet (3 metres)
Communication
- Modbus
Distance
- Distance between Controller & Sensor: Max.
Electrical Connectors
- 2-Conductor Shielded Cable
- M12
Enclosure - Body Material
- PC/PET
- PVC
- Stainless Steel
Environmental Protection
- IP65
- NEMA 12
- NEMA 6P
Materials of Construction
- Transducer: Ceramic
NPT Connection
- 1” NPT Male
- 2” NPT Male
- 3” NPT Male
Operating Temperature
- -30° to 60° C (-22° to 140° F)
Output Format
- DCR Controller
Sensing Range
- Model 1001: 0.6 to 35 feet (0.183 to 10.67 metres)
- Model 1002: 1.5 to 35 feet (0.46 to 10.67 metres)
- Model 3431: 1.25 to 50 feet (0.38 to 15.24 metres)
- Model 5111: 4” to 72” (0.1 to 1.83 metres)
- Model 9421: 0.5 to 35 feet (0.15 to 10.67 metres)
- Model: 2421: 1 to 25 feet (0.3 to 7.62 metres)