Images are representations only.

PI39 Pressure Intensifier

Brand: Bifold - by Rotork
The PI39-TS Intensifier amplifies the inlet pressure to a higher outlet pressure by a predetermined ratio. 

Pressure in the high pressure line can become reduced as a result of a system leak or the use of the stored (pressure) energy. 

The PI39-TS restores and maintains that pressure in such instances. Check and changeover valves are integrated within the main body of the intensifier. 

When the inlet pressure x the ratio = the outlet pressure, then the PI39-TS is in a stalled condition and there is minimal consumption of fluid.

The PI39-TS does not contain a high pressure line vent valve.
Features
  • Designed to boost the pressure of any water-based or mineral/synthetic oil-based fluid
  • Boosts inlet pressure up to 5 times without external power. The maximum outlet pressure is psi: 13,050 (kPa: 90,000, bar: 900)
  • When system pressure is achieved, there is minimal consumption of expensive hydraulic fluid
  • External components manufactured from 316 (standard) no painting required for hostile environments
The PI39-TS Intensifier amplifies the inlet pressure to a higher outlet pressure by a predetermined ratio. 

Pressure in the high pressure line can become reduced as a result of a system leak or the use of the stored (pressure) energy. 

The PI39-TS restores and maintains that pressure in such instances. Check and changeover valves are integrated within the main body of the intensifier. 

When the inlet pressure x the ratio = the outlet pressure, then the PI39-TS is in a stalled condition and there is minimal consumption of fluid.

The PI39-TS does not contain a high pressure line vent valve.
Features
  • Designed to boost the pressure of any water-based or mineral/synthetic oil-based fluid
  • Boosts inlet pressure up to 5 times without external power. The maximum outlet pressure is psi: 13,050 (kPa: 90,000, bar: 900)
  • When system pressure is achieved, there is minimal consumption of expensive hydraulic fluid
  • External components manufactured from 316 (standard) no painting required for hostile environments

Specifications

BSP Connection

  • 1/4” BSP Female

Cone & Thread Connection

  • 1/4” Female Medium Pressure

NPT Connection

  • 1/4” NPT Female

Pressure Range

  • bar: 0 to 900
  • kPa: 0 to 90,000
  • psi: 0 to 13,050

Seat / Seal Material

  • Nitrile
  • Viton

Supply Pressure - Maximum

  • bar: 345
  • kPa: 34,500
  • psi: 5,000