Images are representations only.

Vegawave 61 Vibrating Level Switch

Brand: VEGA
The Vegawave 61 is a level switch for universal use in powders and fine-grained bulk solids. 

The Vegawave 61 detects reliably and robust the min. or max. level. 

The tuning fork is ideal for use either in adhesive and abrasive products as well as in bulk solids with very low density.
Features
  • Minimum Time and Cost Expenditure Thanks to Simple Setup Without Medium
  • Reliable Function Due to Product-Independent Switching Point
  • Low Maintenance Costs Thanks to Robust Design
The Vegawave 61 is a level switch for universal use in powders and fine-grained bulk solids. 

The Vegawave 61 detects reliably and robust the min. or max. level. 

The tuning fork is ideal for use either in adhesive and abrasive products as well as in bulk solids with very low density.
Features
  • Minimum Time and Cost Expenditure Thanks to Simple Setup Without Medium
  • Reliable Function Due to Product-Independent Switching Point
  • Low Maintenance Costs Thanks to Robust Design

Specifications

Brand

Ambient Temperature Range

  • -40° to 80° C (-40° to 176° F)

Applications

  • Detects Reliably & Robust the Min. or, Max.
  • Used as Level Switch for Universal use in Powders & Fine-Grained Bulk Solids

Approvals & Certifications

  • ATEX
  • CSA
  • FM
  • IEC
  • SIL 2

BSP Connection

  • G 1-1/2” Thread Process Fitting
  • 1-1/2” BSPT Male

Cable Entry

  • M20 x 1.5

Connection Material

  • 316L Stainless Steel

Enclosure, Body Material

  • Aluminum Die Casting Powder-Coated
  • Aluminum
  • Plastic
  • Stainless Steel

Environmental Protection

  • IP67

Flange Size - 2” (DN 50)

  • 2” (DN 50) - Class 150 ASME
  • 2” (DN 50) - PN 40

Flange Size - 3” (DN 80)

  • 3” (DN 80) - Class 150 ASME

Flange Size - 4” (DN 100)

  • 4” (DN 100) - Class 300 ASME
  • 4” (DN 100) - PN 16

Frequency

  • 50/60 Hz

Hysteresis

  • 0.08” (2 mm) Approximately with Vertical Installation

Mounting Position

  • Vertical

NPT Connection

  • 1-1/2” NPT - Process Fitting

Operating Voltages

  • 20-253 Vac

Output Format

  • Relay Output
  • Transistor Output

Output Function

  • NAMUR Output

Power Requirement

  • 10 to 400 mA - Load Current

Pressure Range

  • psig: -14.5 to 363 (kPa: -100 to 2,500, bar: -1 to 25)

Process Temperature

  • -50° to 250° C (-58° to 482° F)

Response Time

  • 0.5 seconds: when being Covered - Switching Delay
  • 1 seconds: when being Uncovered - Switching Delay

Seat / Seal Material

  • Klingersil C 4400
  • NBR
  • Silicone

Sensor, Probe Connection

  • 2-Wire for Connection to A Signal Conditioning Instrument - Electronics Versions

Size

  • Clamp: 2”

Storage Temperature

  • -40° to 80° C (-40° to 176° F)

Switch Type

  • NPN/PNP

Wetted Materials

  • 316L Stainless Steel