Images are representations only.
L2101 LED Light, XP, Single- or Dual-Tube, 2-ft or 4-ft, COB, 9W, 18W, 36W, cULus, Class l, Div. 1
Description
- cULus Explosion Proof Approved for Canada & USA
- Explosion Proof, Class 1, Division 1, LED Tube Light
- Single 2 ft Tube: 9W
- Single 4 ft Tube: 18W
- Dual 2 ft Tube: 18W
- Dual 4 ft Tube: 36W
- Class I, Div. 1, Group C, D
- Class II, Div. 2, Group E, F, G
- IP67 / NEMA 6
- Yellow Tube Light
- Single 2 ft Tube: 10W
- Single 4 ft Tube: 20W
- Dual 2 ft Tube: 20W
- Dual 4 ft Tube: 40W
- Ambient Temperature
- CID1: -20°C to +40°C, T6
N
Configure
Specifications
Specifications
Brand
Standards
- UL 844
- UL 1598 Luminaires
- CSA C22.2 No. 137-18
- CSA C22.2 No. 250.0
Protection
- cULus Hazardous Location
- • Class I, Division 1 Group C, D
- • Class II, Division 1 Group E, F, G
Watts (±10%) (Ex Light)
- Single Ex Tube: (2 FT: 9W) (4 FT: 18W)
- Dual Ex Tube: (2 FT: 18W) (4 FT: 36W)
Voltage (±10%) (Ex Light)
- 120-277 VAC
Color of LED Light (EX light)
- Warm White / Natural White / Daylight / Cool White
Lumens per Watt (± 10%) (Ex Light)
- ≥100 lm
Watt (±10%) Yellow Tube Tube
- Single Yelow Tube: (2 FT: 9W) ( 4 FT: 18W)
- Dual Yellow Tube: (2 FT: 20W) (4 FT: 40W)
Volt (±10%) Yellow Tube Light
- 120V-277V AC
Light Color - LED
- Yellow
Amps
- 9W: (120 V: 0.03 A), (277 V: 0.09 A)
- 10W: (120 V: 0.04 A), (277 V: 0.08 A)
- 18W: (120 V: 0.06 A), (277 V: 0.18 A)
- 20W: (120 V: 0.07 A), (277 V: 0.20 A)
- 36W: (120 V: 0.13 A), (1277 V: 0.36 A)
- 40W: (120 V: 0.14 A), (277 V: 0.33 A)
Ambient Temperature
- -20°C to +40°C, T6
Power Factor
- cos ≥ 0.9
CRI
- ≥70 (Excluding Yellow Tube)
Beam Angle
- X-110° / Y-110°
Frequency
- 50/60 Hz
Degree of Protection
- IP67 / NEMA 6
Material
- Body: Aluminum Alloy
- Lighting Tube: Glass
LED Service Life
- 60,000 hours
Entrance Thread
- 1 x 3/4" FNPT (M25)
Electrical Cable
- 3 Ft (1 Meter) cULus, SOOW Cable, 600V, 105°C, 3 x 0.824 mm (18 AWG) FT2
Applications
Applications
Explosion-Proof LED Tube Light
- Compressor Stations
- Power Plants
- Petrochemical Plants
- Waste Water Treatment Plants
- Offshore Platforms
- Storage Facilities
- Paper Mills
- Shipyards
- Loading Docks
Yellow Tube LED Light used in Lithography
- Eliminates Wavelengths shorter than 500 nm
- Prevents early photo-sensitivity in manufacturing of:
- Displays (Touch Panel, LCD, OLED)
- MEMS Devices
- Opto-Electric Devices
- Semi Conductor
- Photo Voltaic
- Wafer-level Packaging
LED Technologies
LED Technologies
For explosion-proof lighting, COB, DOB, and SMD refer to different types of LED technologies used to enhance the lighting performance, efficiency, and durability in hazardous environments.
Each of these LED technologies has its advantages depending on the specific lighting requirements and the environment in which the explosion-proof lighting is used.
COB
Best for powerful, uniform light output over large areas.
DOB
Integrates the driver onto the board, simplifying the design and enhancing reliability.
SMD
Provides flexibility in design with a wide beam angle, commonly used for general lighting applications.
COB - Chip on Board
COB refers to a method of LED packaging where multiple LED chips are mounted directly onto a substrate to form a single lighting module.
- Produces a uniform, bright light with fewer visible points of light (compared to traditional LEDs).
- High efficiency and low heat generation, making it ideal for explosion-proof lighting applications.
- Suitable for large-area lighting due to its concentrated and powerful light output.
DOB - Driver on Board
DOB refers to an integrated technology where the LED driver is built directly onto the LED circuit board.
- Simplifies the design by eliminating the need for a separate driver component, making the fixture more compact.
- Often used in explosion-proof lighting to reduce the number of components, which can increase reliability and reduce costs.
- Typically provides consistent power to the LED chips, improving the overall longevity of the lighting.
SMD - Surface-Mounted Device
SMD refers to LEDs that are mounted directly onto the surface of a printed circuit board (PCB).
- Provides a wide beam angle and is more flexible in design than COB.
- Offers high brightness and is commonly used in explosion-proof lighting for area illumination and flexibility in design.
- SMD LEDs are more widely used in modular lighting designs due to their versatility.
